IndustrialDictionary

Terms starting with W

128 terms.

waffle

A concrete slab used in flooring with a gridlike structure of ribs running at right angles to each other on its underside.

wagon-lit

A sleeping car, often used in international trains in continental Europe; the Wagons-Lits company also ran dining cars.

walk

To tend to move radially while feeding axially, whether tending toward on-center or tending toward off-center. Walking may be desirable (e.g., when a reamer walks into concentricity) or undesirable (e.g., when a twist drill walks into eccentricity.)

wall plate

A piece of timber laid horizontally in or on a wall as a support for a girder, rafter, or joist.

wane

A rounded corner caused by lack of wood, often showing bark.

waned

adjectiveCarpentry

Having wanes, i.e. rounded corners caused by lack of wood, often showing bark.

waney

A sharp or uneven edge on a board that is cut from a log not perfectly squared, or that is made in the process of squaring.

warm working

The process of processing a metal at a temperature between one-tenth and four-tenths of the melting point

warning track

A non-driving surface at the edge of a road, with a different surfacing warning drivers of the approach to the edge of the road, as part of the shoulder of a road.

warp

The threads that run lengthwise in a woven fabric; crossed by the woof or weft.

wash

To separate valuable material (such as gold) from worthless material by the action of flowing water.

wastegate

A valve that allows exhaust gases to bypass an engine's turbocharger, in order to keep from overspeeding the turbocharger rotor or driving the boost pressure high enough to risk engine knocking or detonation.

wasteman

A person employed to examine the state of the mine workings, to check that they are properly ventilated, and sometimes to build pillars to support the roof in the waste.

water injection

The process of squirting a small amount of water, in the form of a fine spray, into the air/fuel mixture going into a gasoline piston engine, in order to cool the engine cylinders, and, thereby, reduce detonation or knocking in high performance engines, especially when using a high compression ratio.

water popping

A technique used to open the grain of wood flooring by introducing clean water to its surface before staining and finishing it.

water trough

a long trough placed between the rails in a railway track, which enabled a steam locomotive to replenish its water supply without stopping by lowering a scoop. They were removed at the end of steam train operation.

water-line model

a model of a vessel formed of boards which are shaped according to the water lines as shown in the plans and laid upon each other to form a solid model

waterstop

A waterproof barrier that is used to prevent moisture from leaking through a joint.

waterworks

nounConstructionarchaic

Engineering works relating to the conveyance and flow of fluids (principally water), such as the collection and distribution of water, drainage, irrigation, etc.

waver

In full waver roller: a roller which places ink on the inking table of a printing press with a back and forth, waving motion.

web

A long sheet of paper which is fed from a roll into a printing press, as opposed to individual sheets of paper.

wedge gear

A specialized friction gear characterized by circumferential grooves of wedge-shaped cross section on its wheel periphery.

well

The lower part of a furnace, into which the metal falls.

wellpoint

A small well consisting of a tube hammered into the ground, that can drain water from a construction site.

wet heater

A torpedo engine where water is injected into the combustion chamber alongside fuel and compressed air or oxygen, cooling the engine and increasing its power through the production and expansion of steam.

wet sump

A type of engine sump where oil pools in a pan at the bottom of the engine.